BM RACING DISCS FOR BIG BRAKE KITS - inc Bolt Kit
BASE PRICE IS FOR BOLT KIT - SELECT DISC SIZE REQUIRED
BASE PRICE IS FOR A SET OF BOLTS included with each disc purchase
PLEASE SELECT THE CORRECT SIZE OF DISC AFTER CONFIRMING IT WILL FIT YOUR APPLICATION VIA EMAIL
- Priced per pair of discs
- British Made
- Machined to order, most sizes and fittings are possible
- Plain cast iron (cannot be coated due to need to bolt to the bell)
- 2 x High Temp Paint Strip (useful to identify where insufficient brake cooling / system capability is evident)
- Under racing conditions disc bulk temperatures should normally be maintained in the range 400°C to 600°C for best performance. Disc face peak temperatures may be higher but should not exceed the maximum recommended for the pad material being used.
- Thermal paint temperature control – BM RACING DISCS are supplied with a two colour temperature checking system.
These change colour at approx 610 deg C (Crimson to White) and 560 deg C (Orange to Yellow).
- Usually supplied Grooved only due the longer life. Drilled or Drilled & Grooved available on request.
BM Racing Discs recommend Ferodo & Stoptech Brake pads
SKU | BMRACINGDISC2PIECEBOLTSET |
---|---|
MPN | BMRACINGDISC2PIECEBOLTSET |