ENGINE MANAGEMENT & FUEL INJECTION
Engine Management
ECUs DIAGNOSTICS STEINBAUER TUNING BOXES THROTTLE BODIES
Please note we can also arrange remapping (chip tuning) via the OBD diagnostic port and on some trickier cars remap via chip removal / jump
Engine Management - a basic guide
With the advanced technology at our disposal nowadays carburettors are almost a thing of the past. Fuel injection comes in many shapes and sizes but in every case there is some form of computer deciding how much fuel to inject and when. It is the optimisation of this management combined with improvements in gas flow that to a large extent mean that a set of racing carburettors are no longer the favoured option.
The majority of production cars use some kind on plenum multipoint injection system. The plenum system allied to a single throttle body gives good mid range torque and low speed flexibility. They are usually well designed enough to enable a fair degree of tuning to release more power at the top end of the rev range. More often than not the biggest challenge is the current engine management system. If you have an airflow meter of some kind your computer will automatically provide more fuel in response to greater airflow. How much it can stand is the question. In Fuel Pumps we discussed fuel flow requirement. We know that the injectors will probably be able to flow up to 20% more fuel, so assuming we install other components (cylinder head, camshaft, exhaust) a 20% power gain keeping standard injection is probably realistic. You then reach a crossroads, either you can remap the existing system and stick with the plenum or you can replace the existing management and upgrade the injectors and keep the manifold. Some event regulations actually state the original induction system must be kept, but that the ECU can be changed. Approximately a 20-50% increase in power should be achievable with N.A engines and more with turbos keeping the existing manifold. Beyond this if your regulations allow throttle bodies are the way to go.
Fuel Injection
- Steinbauer Tuning Box BMW 518d F10 2.0 EUR5 Stock HP:141 Enhanced HP:169 (220531_508)£900.00 £750.00Stock kW:105 Enhanced kW:126
Stock Torque lb ft:266 Enhanced Torque lb ft:319
Stock Torque Nm:360 Enhanced Torque Nm:432
Engine Size:1995cc, TUV Approval:IN PROCESS Learn More - Steinbauer Tuning Box BMW 518d F11 2.0 EUR5 Stock HP:141 Enhanced HP:169 (220531_509)£900.00 £750.00Stock kW:105 Enhanced kW:126
Stock Torque lb ft:266 Enhanced Torque lb ft:319
Stock Torque Nm:360 Enhanced Torque Nm:432
Engine Size:1995cc, TUV Approval:IN PROCESS Learn More - Steinbauer Tuning Box BMW 520d E39 2 Stock HP:134 Enhanced HP:161 (200019_511)£900.00 £750.00Stock kW:100 Enhanced kW:120
Stock Torque lb ft:207 Enhanced Torque lb ft:248
Stock Torque Nm:280 Enhanced Torque Nm:336
Engine Size:1951cc, TUV Approval:YES Learn More - Steinbauer Tuning Box BMW 520d E60-E61 2.0 EUR4 Stock HP:161 Enhanced HP:193 (220002_513)£900.00 £750.00Stock kW:120 Enhanced kW:144
Stock Torque lb ft:251 Enhanced Torque lb ft:301
Stock Torque Nm:340 Enhanced Torque Nm:408
Engine Size:1995cc, TUV Approval:YES Learn More - Steinbauer Tuning Box BMW 520d E60-E61 2.0 EUR4 Stock HP:147 Enhanced HP:177 (220002_512)£900.00 £750.00Stock kW:110 Enhanced kW:132
Stock Torque lb ft:243 Enhanced Torque lb ft:292
Stock Torque Nm:330 Enhanced Torque Nm:396
Engine Size:1995cc, TUV Approval:IN PROCESS Learn More - Steinbauer Tuning Box BMW 520d E60-E61 2.0 EUR5 Stock HP:174 Enhanced HP:209 (220172_514)£1,140.00 £950.00Stock kW:130 Enhanced kW:156
Stock Torque lb ft:295 Enhanced Torque lb ft:302
Stock Torque Nm:400 Enhanced Torque Nm:410
Engine Size:1995cc, TUV Approval:NO Learn More