Coilovers
Coilovers - Supply / Install / Set-Up
The destination for the search term "Coilovers"
We offer a wide range of Coilovers from the leading brands - all available to order online, and in addition, installation and set up is available at competitive rates.
Balance Motorsport can supply and fit and set the car up with Corner Weighting and 4 Wheel Alignment. Which can be done to stock or custom settings.
We often get asked "What is the best coilover kit?" - this usually leads to a long telephone conversation, but a happy customer because we took the time to discuss both the positives and negative of different kits,depending on your requirements. We do this both honestly and concisely*. Please ring 01903 879111 should you wish to discuss.
*no guarantee of concise response, verbose replies are not uncommon.
We provide a wide range to suit all budgets and needs from basic height adjustable kits, right up to advanced 3 way , 4 way and even Semi-Active Suspension.
A coilover kit offers a much stiffer spring (as you no longer use spring compressors to install, so this means a stiffer spring is needed to hold the car up). This stiffer spring will work the tyres harder and make the car much sharper.
Is corner weighting essential when you fit new coilovers? It depends how you go about the install. If you fixate on the ride height, and forget about the spring platforms you could well be a long way off. For more information see our guide How to install coilovers
- Bilstein B16 - PSS9 FULL KIT MITSUBISHI LANCER EVO VII (CT9A) 01.01 - 01.03 (48-086424_525)£1,839.06 £1,532.55
kW Output range 206
FITTING POSITION: FULL KIT
Notes: mark: CT9A/CT0; mark: EVO 7; Conditions see certificatesFRONT: lowering (expertise): 40-50 mm; axle load to: 1015 kgREAR: lowering (expertise): 40-50 mm; axle load to: 900 kg Learn More - Bilstein B16 - PSS9 FULL KIT MITSUBISHI LANCER LANCER Saloon (CS_A) 2.0 16V EVO IX, 2.0 16V EVO VIII, 2.0 4x4 08/05 - (48-086424_517)£1,839.06 £1,532.55
kW Output range 195 - 213
FITTING POSITION: FULL KIT
Notes: Conditions see certificatesFRONT: lowering (expertise): 40-50 mm; axle load to: 1015 kgREAR: lowering (expertise): 40-50 mm; axle load to: 900 kg Learn More - TEIN TYPE HG Suspension MITSUBISHI LANCER EVOLUTION IX CT9A 2005.03-2006.12 (DSR52-W1LS2_17)£1,800.00 £1,500.00TYPE HG GSR, RS, GT SPRINGS KGFmm FRONT- 6 REAR- 6
SPRINGS Lbs Inch FRONT- 336 REAR- 336 Learn More