SUSPENSION
Suspension Specialists in Sussex
Anti-Roll Bars / Bushes / Coilovers / Corner Weighting / Performance Suspension Kits / Springs & Lowering Kits / Shocks (Dampers)
Considered a mysterious art by many, Suspension is the most important aspect to speed over any course with corners - much more so than power.
Suspension consists of generally simple mechanical parts but the relationship between them and the car is very complex. How difficult this task is really depends on the use the vehicle is intended for. For example a road car that you are trying to increase handling ability on will require a very different approach to one used for Motorsport. It is the successful interaction of the components together that creates a car that not only handles and grips well but that is also informative and controllable near, or on the limit. This interaction is influenced by a number of variables such as weight transfer, centre-of-gravity, bump steer, roll steer, downforce and tyres.
The basic components of suspension for road or Motorsport are relatively simple although a number of different layouts are employed. The majority of cars employ a coil spring, shock absorber (damper), wishbones and anti-roll bars. More sophisticated cars come equipped with Coilover shocks. These are available as Coilover Kits as an upgrade for most cars (e.g Bilstein B16 PSS). From the simple macpherson strut set up to the more complicated double wishbone system the objectives are the same.
The most obvious starting point for modification is the springs and dampers. However at Balance Motorsport we aim to ensure you achieve maximum value from any of your purchases. Upgrading suspension springs and dampers to high performance versions, before ensuring that the components they attach to are in good order, is a false economy. Always make sure that your control arm bushes, ball joints, track rod ends and wishbones are serviceable. Don't get het up on replacing every bush with a Poly version either.
A faulty track rod end can cause bump steer, vague steering and poor handling. These components collectively are usually a lot less than a set of adjustable coilovers but the effect of replacement can be as marked on a car where their condition is poor. Notable examples include something with multilink suspension front and rear with lots of replaceable bushes. These can get pricey.Above all if you don't have the budget for a suspension and chassis engineer we can help you achieve results, by tailoring a solution to your regulations!
Please use the sidebar to the left to navigate this category.
suspension for all these makes...... ALFA ROMEO, ALPINA, ARIEL, ASTON MARTIN, AUDI, BMW, CATERHAM ,CHEVROLET, CITROEN, DAIHATSU, FERRARI, FIAT, FORD, GINETTA, HILLMAN, HONDA, JAGUAR, LAMBORGHINI, LANCIA, LOTUS, MASERATI, MAZDA, MERCEDES, MG, MINI, MITSUBISHI, MORGAN, NISSAN, PEUGEOT, PORSCHE, PROTON, RADICAL, RELIANT, RENAULT, ROVER, SAAB, SEAT, SUBARU, TOYOTA, TVR, VAUXHALL, VW, WESTFIELD
Balance Motorsport Suspension Choice and Set up Guide
Balance Motorsport are based in West Sussex BN5 9XH if you would like us to install and set up your suspension. Bespoke suspension solutions available including design services for custom spring / shock combinations.
- Bilstein B16 - PSS10 FULL KIT VW PASSAT PASSAT (362) 1.4 TSI, 1.4 TSI EcoFuel, 1.4 TSI MultiFuel,1.6 TDI, 1.8 TSI, 2.0 TDI,2.0 TDI 4motion, 2.0 TSI, 3.6 FSI 4motion 08/10 - (48-135245_1620)£1,688.10 £1,406.75
kW Output range 77 - 220
FITTING POSITION: FULL KIT
Notes: disconect DCC; outside diameter strut 55 mm; without electronic suspension control; Conditions see certificatesFRONT: lowering (expertise): 30-50 mm; axle load to: 1210 kgREAR: lowering (expertise): 30-50 mm; axle load to: 1250 kg Learn More - Bilstein B16 - PSS10 FULL KIT VW PASSAT PASSAT (3C2) 1.4 TSI, 1.4 TSI EcoFuel, 1.6, 1.6 FSI,1.6 TDI, 1.8 TSI, 1.9 TDI, 2.0 BlueTDI,2.0 FSI, 2.0 FSI 4motion, 2.0 TDI,2.0 TDI 16V, 2.0 TDI 16V 4motion,2.0 TDI 4motion, 2.0 TFSI,3.2 FSI 4motion,£1,688.10 £1,406.75
kW Output range 75 - 220
FITTING POSITION: FULL KIT
Notes: outside diameter strut 55 mm; Conditions see certificatesFRONT: lowering (expertise): 30-50 mm; axle load to: 1210 kgREAR: lowering (expertise): 30-50 mm; axle load to: 1250 kg Learn More - Bilstein B16 - PSS10 FULL KIT VW PASSAT PASSAT CC 1.4 TSI MultiFuel, 1.8 TSI, 2.0 BlueTDI,2.0 TDI, 2.0 TSI, 3.6 FSI 06/08 - (48-135245_42)£1,688.10 £1,406.75
kW Output range 100 - 206
FITTING POSITION: FULL KIT
Notes: disconect DCC; outside diameter strut 55 mm; without electronic suspension control; Conditions see certificatesFRONT: lowering (expertise): 30-50 mm; axle load to: 1210 kgREAR: lowering (expertise): 30-50 mm; axle load to: 1250 kg Learn More - Bilstein B16 - PSS10 FULL KIT VW PASSAT PASSAT Variant (365) 1.4 TSI, 1.4 TSI EcoFuel, 1.4 TSI MultiFuel,1.6 TDI, 1.8 TSI, 2.0 TDI, 2.0 TSI 08/10 - (48-135245_1594)£1,688.10 £1,406.75
kW Output range 77 - 155
FITTING POSITION: FULL KIT
Notes: disconect DCC; outside diameter strut 55 mm; without electronic suspension control; Conditions see certificatesFRONT: lowering (expertise): 30-50 mm; axle load to: 1210 kgREAR: lowering (expertise): 30-50 mm; axle load to: 1250 kg Learn More - Bilstein B16 - PSS10 FULL KIT VW PASSAT PASSAT Variant (3C5) 1.4 TSI, 1.4 TSI EcoFuel, 1.6, 1.6 FSI,1.6 TDI, 1.8 TSI, 1.9 TDI, 2.0 BlueTDI,2.0 FSI, 2.0 TDI, 2.0 TDI 16V, 2.0 TFSI 08/05 - (48-135245_1487)£1,688.10 £1,406.75
kW Output range 75 - 147
FITTING POSITION: FULL KIT
Notes: outside diameter strut 55 mm; Conditions see certificatesFRONT: lowering (expertise): 30-50 mm; axle load to: 1210 kgREAR: lowering (expertise): 30-50 mm; axle load to: 1250 kg Learn More - Bilstein B16 - PSS9 FULL KIT VW PASSAT PASSAT (3B2) 1.8 Syncro/4motion, 1.8 T Syncro,1.9 TDI 4motion, 1.9 TDI Syncro/4motion,2.0 4motion, 2.3 VR5 Syncro/4motion,2.5 TDI Syncro/4motion, 2.8 Syncro,2.8 V6 4motion, 2.8 V6 Syncro/4motion 10/96 - 11/0£1,766.64 £1,472.20
kW Output range 81 - 142
FITTING POSITION: FULL KIT
Notes: Conditions see certificatesFRONT: lowering (expertise): 25-45 mm; axle load to: 1260 kgREAR: lowering (expertise): 20-40 mm; axle load to: 1200 kg Learn More